Material Handling and Tool Storage - Jacks

Amrox 10 Ton Cap Port-A-Jack Kit  Click Here for more information or to order	• Complete starter set • Powerful heavy-duty ram cylinder • Sturdy plastic case • Spreader ram standard • Shipping Weight: 90 lbs. • See full list of items included below

Amrox 4 Ton Capacity Port-A-Jack Kit  Click Here for more information or to order	• Complete starter set • Spreader ram standard • Sturdy metal carrying case • Full line accessories • Shipping Weight: 48 lbs. • See full list of items included below

Jet Equipment & Tools Hydraulic Jacks  Click Here for more information or to order	• Tested to 150% of rated capacities • Not affected by temperature extremes • Rigidly adheres to ANSI and JIS standards • Electrically welded base and cylinders to eliminate leaks • Common release valve assemblies for quick repair are standard • All models work in upright, angle or horizontal position • Carrying handle on 12-1/2 - 35 ton models

Jet Equipment & Tools Screw Jacks  Click Here for more information or to order	• Corrugated-topped steel screws turn easily under load • Semi-steel base is set to sit firmly in place without slipping • Easy to carry built-in handle • Acme type threads • Turning bars not included, but are available as an accessory • Rated capacities of 5, 10, 15, 20 and 25 tons (as listed in model number)

Jet Equipment & Tools Short Service Jack  Click Here for more information or to order	• 2 Piece, full length handle has knurled grip for safe easy turning • Full swivel, ball bearing rear casters are positioned for best load distribution, optimal maneuvering • Features safety overload • Steel side plates • 4-3/4 Saddle • Maximum height: 19.25" • Net weight: 83 lbs. • Length: 26.5" • Minimum height: 4-1/2 • Capacity: 2-1/4 tons • Width: 13-7/8 • Handle length: 39-7/8 • TRUCK F.O.B. SHIPPING POINT

Jet Industrial Duty Hydraulic Jacks Click Here for more information or to order	Tested to 150% of capacity. Electrically welded base and cylinders to assure strength and eliminate leaks. Common release valve assemblies and other interchangeable parts for quick repair are standard. All models work in upright, angle or horizontal position. Rigidly adheres to ANSI and JIS standards.

Jet Screw Jacks Click Here for more information or to order	Corrugated-topped steel screws turn easily under load. Semi-steel base is built to sit firmly in place without slipping. Easy to carry with built in handle. Acme type threads. Turning bar not included.

Jet Service Jacks Click Here for more information or to order	Strong steel side plates. Swivel saddle. Heat-treated parts at maximum stress points. For heavy-duty applications. 3 and 5 ton models have a locking T-bar handle and foot pump. Hydraulic cylinder parts are high pressure tested at the factory. Upper lifting limit safety bypass. 2 Ton model has two-piece handle.

Jet Short Service Jacks Click Here for more information or to order	Features safety overload. Steel side plates. Full swivel casters. Two-piece, full length handle has knurled grip for safe, easy turning. Full swivel, ball bearing rear casters are positioned for best load distribution, and optimal maneuvering.

Starrett Clamping Accessories - Jackscrews No. 190, 191 Series - “Little Giant”  Click Here for more information or to order	For leveling work on planer beds, upright drills and setting up machinery. The versatility of this tool is greatly increased by the number of attachments available.

Starrett Little Giant Jackscrews Click Here for more information or to order	Heavy-duty. For leveling work on planer beds, upright drills and setting up machinery.

Starrett Little Giant Jackscrews - Jackscrews No. 190, 191 Series - “Little Giant”  Click Here for more information or to order	• Use for leveling work on planer beds, upright drills and setting up machinery • Large number of attachments increases versatility

Turning Bars for Jet Screw Jacks Click Here for more information or to order

XACT Clamping Accessories - MachinistsÆ Jack  Click Here for more information or to order	• A shop tool with hundreds of uses • Made of heavy cast steel with an adjustable screw and tilting swivel head • Features an adjusting pin and lock nut for permanent positioning • 250 lbs. Weight capacity • IMPORT