Search:

View Janitorial Products Index

Click Here for Ordering Instructions and Shipping Information

MRO Pictorial Index

Abrasives



Cutting Tools



Indexable Cutting Tools




Fasteners, Metals & Plastics



Fluids & Lubricants



Hand Tools



Machinery & Accessories



Material Handling



Power Tools



Precision Tools



Safety



Shop Supplies



Toolholding & Workholding



Tooling Components




Precision Tools - V-Blocks


Click Here for more information or to order

Avenger TIN Coated V-Block Sets

  • Made from 1 piece of solid steel hardened and ground to close tolerances.
  • Clamps to almost any work surface.
  • Sold in pairs.
  • Reversible swing away clamps provided with block.
  • Titanium Nitride coated for wear and corrosion resistance.





Click Here for more information or to order

Brown & Sharpe - Ultra Wee-Vee Set 

• Use this universal holding tool for small, miniature or intricate parts
• Ideal for holding grinding/indexing punches and pins, drilling, milling, EDM, inspection on optical comparators
• Capable of holding parts as small as a paper clip

Click Here for more information or to order

Brown & Sharpe Magnetic Chuck V-Blocks and Parallels 

Chuck Parallels
• For use on Permanent Magnet chucks and electro-magnetic chucks
• Finished chuck parallels are ground parallel on opposite side and at right angles on adjacent sides
• Semi-finished chuck parallels are specially suited to manufacturers who wish to finish parallels themselves, per application
• Similar to finished chuck parallels
• Available only in numbered matched pairs
Chuck V-Blocks
• Used singly or in pairs
• Blocks have 90º V-slot
• .0005" Central parallel and square with all surfaces except ends
• Sides parallel to .0003"
• Adjacent sides square to .0003"
• Lamination pitch is .167"

Click Here for more information or to order

Brown & Sharpe Ultra Wee-Vee Set

  • Capacity: .030" to 9/32".
  • Furnished with bridges to straddle long workpieces, allowing top hold-down screw of V-block clamp to be utilized.
  • Hardened and high precision ground
  • Wee blocks, squareness and parallelism within .0002".
  • Set contains 2 Ultra Wee-Vee Blocks, size A .030"-5/32" cap., Bridge A and B, plus 5 upper prisms, 1/8", 5/32" and 3/16" cap., all in a fitted case.
  • Furnished with 2 V-blocks & 1 clamp 1-5/8"Wx1-3/4"Hx2-3/4"T- 1-1/2" Capacity.





Click Here for more information or to order

Brown & Sharpe V-Blocks and Clamps - Multi-Use V-Blocks and Clamps 

• Stepped groove construction
• Made of hardened steel in numbered pairs
• Features clamps within grooves permit use on sides
• 2-1/2" Long, 2-3/4" wide, 2" high
• Work capacity to approximately 2" diameter
• V-grooves are central, parallel and square with all surfaces within .0003"
• V-groove is 90º +.0000" - .0003"
• Corresponding dimensions for each pair are alike within .0003"

Click Here for more information or to order

Brown & Sharpe V-Blocks and Clamps - Toolmakers' 

• Can be used on sides or base
• Case is hardened and ground
• 2 V's, 4 tapped holes (3/8 - 16)
• Central hole in V for removing pins or drilling
• Forged clamp has adjustable side screw to support the block and prevent tilting
• 1-5/16" (33 mm) Diameter capacity
• Each block is 1-7/8" square and 3-5/8" long
• All surfaces (except vees) parallel and square within .0002"
• Long V-groove is central, parallel and square with all surfaces within .0003"
• Half-inch V-groove is central, parallel and square with all surfaces within .00015"
• V's are 90º +.0000" - .003"

Click Here for more information or to order

Brown & Sharpe V-Blocks and Clamps - V-Blocks and Clamps 

• Made in numbered pairs from mild steel.
• Accuracy: .003".
• Dimensions: 2-1/2" square. 3" long. Approx. 1/2" to 2-1/2" diameter capacity.

Click Here for more information or to order

Brown & Sharpe V-Blocks and Clamps 

• Made in numbered pairs from mild steel
• Accuracy: .002"
• Dimensions: 1-1/2 square, 2" long
• Approx. 1-1/2" diameter work capacity

Click Here for more information or to order

Brown & Sharpe V-Blocksand Clamps 

• Made in numbered pairs from mild steel.
• Accuracy: .002".
• Dimensions: 1-1/2" square. 2" long. Approx. 1-1/2" diameter capacity.

Click Here for more information or to order

Flexbar Ball Bearing V-Blocks 

• Ideal for use where inspection set-ups are not otherwise possible using plain vee blocks
• These unique products allow you to inspect and detect out of round conditions, defects and lobes without damage to parts or blocks
• Accuracy of Balls: 25 millionth of an inch sphericity on small and medium set. 50 millionths of an inch on large set
• Overall accuracy of matched pairs + 5 microns
• Balls Rockwell C-62 - Surface finish 0.2 microinches
• Calibrated balls are certified
• Class 40 cast iron, used on base and housing, is heat stabilized and seasoned
• Spacers are hardened through and precision ground by pairs
• Pair of blocks assembled using metrology equipment
• MADE IN USA

Click Here for more information or to order

Fowler V-Blocks and Clamps - V-Block Set 

2 Each at:
• Dimensions: 1-1/2"L x 1-1/4"W x 1-1/4"H
• Work capacity: Approximately 1"

2 Each at:
• Dimensions: 2"L x 1-1/2"W x 1-1/2"H
• Work capacity: 1-1/2"

All Feature:
• Surfaces are square and parallel within .0003"
• V-grooves are square and parallel with all surfaces within .0003"
• Corresponding dimensions for each pair are alike within .0003"
• All enclosed in shop-hardened case

Click Here for more information or to order

Harig Super Wee Blocks 

• Unique and universal holding tool for small and intricate parts, used in conjunction with larger V-Blocks
• Capacity .030" to 9/32"
• Furnished with bridges to straddle long workpieces, allowing top hold-down screw of V-Block to be utilized
• Squareness and parallelism within .0002"
• MADE IN USA

Click Here for more information or to order

Starrett Dual Vee Magnetic V-Block 

• All working surfaces are precision ground
• 2 Precision vees hold round stock sizes from 1/4" to 1-3/4" diameters
• Includes a powerful magnet controlled by rotary switch
• Square and parallel within .0002"

Click Here for more information or to order

Starrett V-Block and Clamp 

• Features swing-away style clamping with 2 clamp screws
• Mounts to face plate, angle plates or other fixtures
• Made from precision ground hardened steel
• 5-1/4"W x 3"H x 3-3/8"L
• Large 4" capacity

Click Here for more information or to order

Starrett V-Blocks


Click Here for more information or to order

Starrett V-Blocks and Clamps - Toolmakers' 

• Clamp is within outside width of block
• May be used on base, end and flat on either side
• Hole clearance for drilling and removing dowel pins provided
• Block has four 3/8 - 16 tapped holes, 2 in the base and one on each side to attach to angle iron. Angle iron may be attached to lathe face plate or held by magnetic chuck
• Block made of hardened steel
• Sides ground parallel to central groove and parallel to the sides and base
• Size 1-7/8" square, base length about 3 - 12"
• Capacity 1-5/16"

Click Here for more information or to order

Starrett V-Blocks and Clamps - V-Blocks and Clamps 

• 6" Steel rod passes through each block and is firmly held by friction bushings. When using the blocks in pairs, the rod keeps the blocks in alignment and holds both of them under the work
• Each block is 1-1/4" square
• Includes 2 grooves in each side to hold the clamp for small or large work
• Clamp is steel forged
• 1-1/4" Diameter capacity
• Large “V” is about 13/16" and the small “V” about 13/32" across the mouth

Click Here for more information or to order

Suburban Tool - Precision V-Blocks 

• Provides a quick, accurate and positive means of holding workpieces for layout, machining, grinding or inspection
• All models are square, parallel and central within .0002"
• 1 Reversible, swing-away clamp is provided with each V-block
• MADE IN USA

Click Here for more information or to order

Suburban Tool Precision V-Blocks

  • Offers a quick, accurate and positive means of holding workpieces for layout, machining, grinding or inspection.
  • Versatile clamp with unique offset hole pattern in the top of the V-block.
  • Steel, hardened to RC50-62.
  • Guaranteed square, parallel and central within .0002".
  • 1 Reversible swing-away clamp provided.
  • All V-blocks shown are part of the Sine-SetTM System.





Click Here for more information or to order

XACT Cast Iron V-Blocks - High Quality 

• Supplied in pairs
• Made from high quality castings, properly seasoned against distortion
• Blocks are accurately machined square and parallel

Click Here for more information or to order

XACT MachinistsĘ V-Blocks Set 

• Moderately priced set of V-blocks designed for machine shop
• Approximately 1-1/2" diameter clamping capacity
• Set consists of 2 V-blocks and 1 clamp
• Size of each block: 1-1/2" x 1-1/2" x 2"
• IMPORT

Click Here for more information or to order

XACT Magnetic V-Blocks

  • Lever operated on/off switch eliminates need for separate, easily lost wrenches.
  • Useful in scribing off round bars, grinding, cutting and finishing operations.





Click Here for more information or to order

XACT Magnetic V-Blocks and Parallels

  • Integrally aluminum cast into one solid piece.
  • Ground all over and serial numbered in pairs.
  • V-blocks hold in any direction on the magnetic chuck.


Specifications:

  • Small V-Block - 1-7/8"x2-3/8"x2" Large V cap 2" round, Small V cap 1/2" round.
  • Large V-Block - 1-7/8"x2-3/8"x4-3/8" Large V cap 2" round, Small V cap 1/2" round.
  • Chuck Parallel - Aluminum cast, 1"x2"x4" ground all over.





Click Here for more information or to order

XACT Magnetic V-Blocks 

• Holds cylindrical workpieces for grinding
• Holds to any flat non-ferrous surface
• Will not energize permanent magnetic chuck
• Holds up to .750" on small vee
• Holds up tp 2.500" on large vee

Click Here for more information or to order

XACT Precision V-Block Sets 

• 2 Reversible swing-away clamps provided per set
• Clamps to almost any work surface
• Parallel, square and centered within .0002"

Click Here for more information or to order

XACT Precision V-Blocks

  • Blocks are chrome steel, hardened and ground.
  • Accurate enough for layout and surface plate use.
  • Square, parallel and concentric within +.0001".
  • 90° V angles.





Click Here for more information or to order

XACT Super Wee Block Set

  • A unique and universal holding tool for small, miniature or intricate parts used in conjunction with larger V-Blocks.
  • Capacity .030" to 9/32".
  • Ideal holding fixture for grinding/indexing punches and pins, drilling, milling, EDM and inspection on optical comparators.
  • Furnished with bridges to straddle long workpieces allowing top hold-down screw for v-blocks clamp to be utilized.
  • Hardened and high precision ground for squareness and parallelism to within .0002".
  • Includes attractive case.





Click Here for more information or to order

XACT Toolmakers V-Blocks

  • Hardened and ground within .0003".
  • Model #67610018E double V Type holds large and small work. Four tapped holes 3/8-16 for additional clamping. Adjustable side screw for support.
  • Model #67605728E made of two matched blocks and 2 clamps. Step groove construction permits clamping use on its sides.





Click Here for more information or to order

XACT USA Made Super Wee Blocks 

• Unique and universal holding tool for small and intricate parts, used in conjunction with larger V-Blocks
• Capacity .030" to 9/32"
• Furnished with bridges to straddle long workpieces, allowing top hold-down screw of V-Block to be utilized
• Squareness and parallelism within .0002"
• MADE IN USA

Click Here for more information or to order

XACT USA Made V-Blocks and Clamps 

• Dimensions: 1-1/4" x 1-1/4" x 1-5/8" long
• Capacity: Large Vee - 1" diameter Small Vee - 1/2" diameter
• Made from hardened and ground steel
• Accuracy: Square within .0002" Parallel within .0002"
• Serial numbered in matched pairs
• 2 Vee blocks and 2 clamps included
• MADE IN USA

Click Here for more information or to order

XACT V-Block Sets

  • Made of high quality fine grained cast iron, stress relieved.
  • Ideal for holding round and irregular shaped parts in drilling, machining, inspection, etc.
  • Accurately machined with 90° vee in center.
  • Machined square and parallel to base within .001".
  • Sold in pairs.





Click Here for more information or to order

XACT V-Blocks and Clamps - Multi-Use V-Blocks and Clamps 

• Stepped groove construction
• Made of hardened steel in numbered pairs
• Features clamps within grooves permit use on sides
• 2-1/2" Long, 2-3/4" wide, 2" high
• Work capacity to approximately 2" diameter
• V-grooves are central, parallel and square with all surfaces within .0003"
• V-groove is 90º +.0000" - .0003"
• Corresponding dimensions for each pair are alike within .0003"

Click Here for more information or to order

XACT V-Blocks and Clamps - Toolmakers' 

• Can be used on sides or base
• Case is hardened and ground
• 2 V's, 4 tapped holes (3/8 - 16)
• Central hole in V for removing pins or drilling
• Forged clamp has adjustable side screw to support the block and prevent tilting
• 1-5/16" (33 mm) Diameter capacity
• Each block is 1-7/8" square and 3-5/8" long
• All surfaces (except vees) parallel and square within .0002"
• Long V-groove is central, parallel and square with all surfaces within .0003"
• Half-inch V-groove is central, parallel and square with all surfaces within .00015"
• V's are 90º +.0000" - .003"

Click Here for more information or to order

XACT V-Blocks and Clamps 

• All sides are ground and parallel to each other
• MAY-13100E and MAY-13105M are designed so the clamps do not protrude, thus the tool may be used on its side
• Sturdy enough to be used in machining operations
• Matched accuracy ± .0002"
• 90º Vees are ground central, parallel and square with the ends
• Sold in matched pairs


Servicing Industry Since 1968

Have a Question or Need Technical Assistance? For Personal Service Click Here to contact a NSS dealer for your state.