Toolholding/Workholding - Vises - Drill Press Vises

Cardinal Drill Press Speed Vises  Click Here for more information or to order	• Ideal for production and prototype work • Use with a wide variety of parts and material shapes • Save time with the quick action design for speed • Offers easy loading and unloading of parts • Features heavy semi-steel castings and base plate for strength • Standardized holes in jaw allows you to conveniently attach interchangeable jaw plates (included)

Cardinal Speed Vise Jaw Plates  Click Here for more information or to order	Hardened alloy steel Combination Jaw Plates have steps to elevate material for clear-through drilling. The vertical or horizontal grooves hold round and irregular parts and smooth ground faces on the back and may be used for small parts. These versatile jaw plates are recommended for general drilling, tapping, etc. • Alloy steel, hardened and ground • Elevated steps for through drilling • Deep V-grooves, both vertical and horizontal • Sockethead cap screws included • 6" Jaw Width

Heinrich Drill Press Vises  Click Here for more information or to order	• Screw action vise conveniently allows you to use from 3 sides • Ample clearance from parallels to table, plus widely spaced jaw bar, enables you to drill clear through work • Recessed parallel jaw inserts allow work to be leveled quickly • Jaw sides are precision ground at right angle to jaw inserts providing you with accurate matching from any direction without resetting the work • Built-in V-groove in models 20 and 30 enables you to hold round stock firmly for side and end rolling

Heinrich Grip Master Drill Press Vises - V-Block Attachment  Click Here for more information or to order	• Set the jaws in position with the easy-to-use push or pull spindle on the center bar knob • Pressing on lever cams jaw ahead 3/32" exerting adjustable holding pressure from 400 lbs. to 1,100 lbs. • Hollow base enables you to have clear-through drilling • V-block attachment (optional for Heinrich), provides you with greater accuracy • Features recessed parallel jaw inserts • MADE IN USA

Heinrich Grip-Master Drill Press Vises Click Here for more information or to order	Screwless design for rapid opening, closing and locking. Lever cams jaw ahead 3/32". Holding pressure is adjustable from 400 to 1600 lbs. Hollow base for clear through drilling. Hardened and ground bars and locking mechanism.

Heinrich Grip-Master Fixture Locks  Click Here for more information or to order	• Quick acting clamps simplify jig and fixture design to speed production • Long travel provides you with easy loading and unloadingcapability and plenty of chip clearance • Perfect for hard-to-reach places • Bar is soft 1" on end to adapt to fixture

Heinrich Safety Drill Press Vise  Click Here for more information or to order	• Sets instantly by sliding movable jaw into position • Pressing on lever advances jaw and locks workpiece securely • Built-in recessed parallel jaws hold work square • Vertical V-groove in jaw provides grip on rounds • Mounts on drill press table and swings away when not in use • Jaw height: 1-3/4 • Jaw length: 5-21/32 • Jaw opening: 12-3/4 • Depth to bar: 3" • Overall length: 20-1/2" • Shipping weight: 12 lbs.

Jet Drill Press Vises Click Here for more information or to order	Axial sleeve and moveable jaw are cast in one single piece. Allowable tolerance between the axial sleeve and center bar is 0.002". The manner in which the center slide bar is connected to the axial sleeve assures an even 360 degree contact. Much more accurate and stable than traditional screw and cross plate means of attaching the movable jaw to the vise bed.

Jet Quick Grip Drill Press Vises Click Here for more information or to order	Instant setting by moving sliding steel bar and handle attached to movable jaw. Locking the workpiece in the vise jaws is achieved by means of a cam action on the lead bar caused by a single strike of the locking lever. High tensile strength. Lead bar, sliding bars and locking ring are precision hardened and ground. Body and movable jaw have been stress relieved. Suitable for milling and drilling applications. Horizontal/vertical models are precision ground on both sides.

Palmgren Drill Press Vices  Click Here for more information or to order	Handy general purpose vices every shop needs. These are general purpose vices recommended for use on drill presses, milling machines, grinders, and other machine tools. They have fine thread adjusting screws and ground steel jaws. The fixed jaw is grooved horizontally and vertically for convenience in holding round pieces. Bolt lugs permit rigid mounting on a machine table.

Palmgren Drill Press Vises Click Here for more information or to order	High tensile iron casting. Accurate machining and assembling. Jaw plates-one grooved and one plain. Four sides and one end machined. Precision cut Acme thread. All vises can be turned on either side or placed on end for general use.

Palmgren Drill Press Vises with Mounting Lugs  Click Here for more information or to order	• Fixed jaw is grooved horizontally and vertically for convenience in holding round stock • Fine pitch, V-thread lead screw for precise movement • Model 12153 has 3/8" bolt lugs; 12302 has 9/16" bolt lugs • Made from FC25 fine grain cast iron • Lifetime guarantee • MADE IN USA

Palmgren Ground Drill Press Vises  Click Here for more information or to order	• Precision ground for squareness and parallelism to ± .0002 per inch • Ground on 5 sides to assure accurate positioning for grinding and layout operations • Both jaws are ground smooth • Made from FC25 fine grain cast iron • Lifetime guarantee • MADE IN USA

Palmgren Traditional Drill Press Vises  Click Here for more information or to order	• Traditional drill press vises for drilling, grinding, tapping, reaming, and more • Machined 4 sides so it can be used on sides or end • Replaceable jaw plates except 12251 which has grooved cast jaw • Palmgren numbers 12301 and 12602 have side grooves for mounting brackets • Made of FC25 fine grain cast iron • Lifetime guarantee • MADE IN USA

Palmgren Utility Drill Press Vise  Click Here for more information or to order	• Sturdy and compact, with longer 4" jaw opening • Overall height of only 2-1/2" • Jaw width: 3-1/2 • Jaw depth: 1-1/2 • Base includes 3 bolt lugs for versatility in mounting • Steel adjusting screw has a coarse pitch Acme thread for fast action • Moveable jaw is grooved vertically • Lifetime guarantee • MADE IN USA

Starrett Drill Press Vises - Quick Adjusting Click Here for more information or to order	Built for years of rugged service. Attractive finish. Furnished with replaceable smooth steel jaws.

Starrett Drill Press Vises - Standard Click Here for more information or to order	Built for years of rugged service. Attractive finish. Furnished with replaceable smooth steel jaws.

Wilton Drill Press Vises  Click Here for more information or to order	• Rugged design and large workload capacity make these vises perfect for the most difficult drilling, tapping or reaming operations • The 1400 Series is made of graded cast iron and precision 90º machining of the vise's sides. The free sliding jaw for fast loading and unloading of production material. A Rapid Action Nut engages for powerful tightening and a sure grip • The 1300 Series is made of graded cast iron and offers a ground vise bed for smooth consistent jaw movement. The hardened top jaws have V-grooves

XACT Tilting Drill Press Vises  Click Here for more information or to order	• Gray crackle finish • Chrome clad screws and handle • Machined gibs • Vise can be adjusted and locked from 0º - 90º • Precision graduated for accurate adjustment • Removable hardened jaws • 6 Slots for easy mounting to machine table