|
SGS Tool Z-Carb Solid Carbide End Mills
 |
Z-Carb Testimonials:
That’s not carbide, its Kryptonite! (After testing on a Haas Machine with test parameters as follows: Milling 8620 on a 7HP lathe. 1 Inch diameter Z-Carb pocket was 1 Inch axial depth ½ Inch radial depth 1,000 RPM 10 IPM… normally 5 parts w/ Hanita rougher @4ipm & 600 RPM . Z-Carb ran 19 parts!
-a Haas Associate in California
I believe in the Z-Carb! (After a Saturday shop visit where his customer cut machining time down 90% and the shop owner told the tool crib attendant to ONLY order Z-Carb.)
-a New York state distributor
Click Here to see more of what people are saying about the revolutionary new Z-Carb end mills..
|
SGS Tool's new Z-Carb Solid Carbide End Mills are Revolutionizing Milling!
|
 |
SGS's Z CARB end mill features a patented design geometry and superior strength which maximize stock removal and improves productivity in most milling operations.
Z Technology is engineered to resist chatter, reduce harmful machine vibrations, increase tool life, and optimize productivity. Other benefits include less tool deflection, improved dimensional control, and enhanced surface finish.
The Z CARB design incorporates enhanced corner strength with the addition of a corner radius. Z CARB is AlTiN coated to resist the heat generated during aggressive milling operations. |
Many styles and sizes of Z-Carb end mills are available.
Click Here to Request a Quote. Click Here to shop for Z-Carb Solid Carbide End Mills online at National Supply Source
Order SGS Tool Z-Carb End Mills
online at National Supply Source |
return to top
Request a Quote
Go To Home Page
Contact Us
National Supply Source
111-115 Leo Avenue
Syracuse, NY 13206
Phone (315) 463-6241
Fax (315) 463-0316
Your source for industrial supplies, tools and metals.
Most major credit cards accepted. Check your distributor’s home page for credit cards accepted.
|